Website Banner
       
   

Ntega Vita

 

   

 

The integrating of the inverted microscope objective into the central base becouse of high mechanical rigidity provides stability of the system making quality images and long-term experiments possible. Inverted optical microscope stability is not so important any more.

Product Features

  • Different liquid cells are available: hermetic chemically stable liquid flow cell with a possibility of the temperature control at elevated temperatures; closed liquid flow temperature controlled cell for operating with Petri dishes; replaceable heater.
  • Hermetic liquid cell (MP4LCNTF)
    - Flow-through possibility and heating (up to 60oC stability ~0,05°C)
    - Control and changing of biochemical environment in solution during measurements
    - Range of sample positioning 1x1 mm, positioning resolution 5 um.
    - Chemically stable materials (stainless steel, fluoroplast) allow operation in aggressive solvents such as H2SO4, HCl.
  • Quasi-hermetic liquid cell for Petri dishes (MP5LCNTF)
    - Flow-through possibility and heating up to 50°C.
    - Range of sample positioning 1x1 mm, positioning resolution 5 um.
    - Removable heater for the separate cleaning. The heater and the temperature control sensor are located inside the fluoroplastic tube.
    - Changeable probe holder with a glass prism and a silastic membrane
 

Scanning Probe Microscopy

SPM methods

in air & liquid

AFM (contact + semi-contact + non-contact) / Lateral Force Microscopy / Adhesion Force Imaging/ Force Modulation/ Phase Imaging/ AFM Lithography (scratching)/ Force- Distance curves

in air only

STM/ Magnetic Force Microscopy/ Electrostatic Force Microscopy / Scanning Capacitance Microscopy/ Kelvin Probe Microscopy/ Spreading Resistance Imaging/ Lithography: AFM (Current), STM

 

Scanning by sample

Scanning by probe*

Sample size

in air

40 mm in diameter,
15 mm in height

100 mm in diameter,
15 mm in height

in liquid

Up to 14x14x2.5 mm

Up to 15x15x3 mm

XY sample positioning range

in air

5x5 mm, readable resolution -5 um
sensitivity -2 um

in liquid

1x1 mm, readable resolution -5 um
sensitivity-2 um

Scan range

100x100x10 um, 3x3x2.6 um
100x100x10 um, 50x50x5 um

Up to 200x200x20 um** (DualScan™ mode)

Non-linearity, XY
(with closed-loop sensors***)

< 0.1%

< 0.15%

Noise level, Z
(RMS in bandwidth 1000 Hz)

With sensors

0.04 nm (typically),
≤ 0.06 nm

0.06 nm (typically),
≤ 0.07 nm

Without sensors

0.03 nm

0.05 nm

Noise level, XY***
(RMS in bandwidth 200 Hz)

With sensors

0.2 nm (typically),
≤ 0.3 nm (XY 100 um)

0.1 nm (typically),
≤ 0.2 nm (XY 50 um)

Without sensors

0.02 nm (XY 100 um)
0.001 nm (XY 3 um)

0.01 nm (XY 50 um)

Temperature control
(For operation in fluid environment)

Range

-

from RT to 60°C

Stability

-

≤ ±0.01°C

*Scanning head can be configured to serve as a stand-alone device for specimens of unlimited sizes.
** 200 m scan range is possible with the unique DualScan™ mode when scanning by sample and scanning by probe can be done simultaneously.
*** Built-in capacitive sensors have extremely low noise and any area down to 50x50 nm can be scanned with closed-loop control.


Download Catalog
NTEGA VITA.pdf


Current Pageid = 91